首先，混凝土搅拌车的选址应根据其产量来确定，以保证原材料的储备能满足施工需要。在购买产品之前，您可以与制造商详细沟通其占地面积，然后制定相应的计划。
Firstly, the site selection of concrete mixer truck should be determined according to its output, so as to ensure that the reserve of raw materials can meet the construction needs. Before purchasing products, you can communicate with the manufacturer about the floor area in detail, and then make corresponding plans.
后来，混凝土搅拌车的筒仓分区是合理和标准的，筒仓储存应满足两个连续的生产高峰的需要。砂石应分区域存放，并按“等候区”和“合格区”设置。各区域应根据不同的品种和规格用隔墙隔开，并设置或预留必要的冲洗或屏蔽设施。
Later, the silo zoning of concrete mixer truck was reasonable and standard, and the silo storage should meet the needs of two consecutive production peaks. Sand and gravel shall be stored in different areas and set according to "waiting area" and "qualified area". All areas shall be separated by partitions according to different varieties and specifications, and necessary flushing or shielding facilities shall be set or reserved.
其次，为了保证夏季混凝土进入模板时的温度，砂石要用牢固的脚手架遮挡，以达到遮阳、防雨、防尘等目的，并设置或预留夏季降温和冬季保温措施，确保混凝土温度符合要求。
Secondly, in order to ensure the temperature when the concrete enters the formwork in summer, the sand and gravel shall be covered with a firm scaffold to achieve the purposes of shading, rainproof and dustproof, and the cooling measures in summer and thermal insulation measures in winter shall be set or reserved to ensure that the concrete temperature meets the requirements.
提高混凝土搅拌车效率的根本途径是设备和人力的成熟，场地的标准化也非常重要，建立标准场地有助于节省运输时间，提高整个混凝土搅拌车的工作效率。那么，用户应该如何规范场馆呢？
The fundamental way to improve the efficiency of concrete mixer truck is the maturity of equipment and manpower. The standardization of site is also very important. The establishment of standard site will help to save transportation time and improve the work efficiency of the whole concrete mixer truck. So, how should users regulate venues?
混凝土搅拌车场地和道路必须进行地基处理和表面硬化处理，以满足重型车辆的交通要求。场地应有完善的排水设施，排水通畅，无明显积水或坑洼。现场检查，需要清洁无灰尘，配备消防和*用电设施，悬挂各种*警示标志，同时设置污水池和垃圾池，满足环保要求。
The ground treatment and surface hardening treatment must be carried out for the site and road of concrete mixer to meet the traffic requirements of heavy vehicles. The site shall have perfect drainage facilities, with smooth drainage and no obvious ponding or potholes. During the on-site inspection, it is necessary to be clean and dust-free, equipped with fire-fighting and * power facilities, hang various * warning signs, and set up sewage tanks and garbage tanks to meet the requirements of environmental protection.
混凝土搅拌车生产效率有如下因素影响：
The production efficiency of concrete mixer truck is affected by the following factors:
1、混凝土搅拌车本身的可靠性和性能：要做好维护保养，调试到各个部分相互匹配，避免意外停机，就可以保证系统效率的基础。
1. The reliability and performance of the concrete mixer truck itself: it is necessary to do a good job in maintenance and debugging until all parts match each other to avoid accidental shutdown, which can ensure the basis of system efficiency.
2、生产组织的合理性：不缺料等料，不等车；材料配比合理均衡，材料质量符合要求，这是应用层面保证效率的关键。
2. Rationality of production organization: no shortage of materials, no waiting for vehicles; The material ratio is reasonable and balanced, and the material quality meets the requirements, which is the key to ensure the efficiency at the application level.
3、场地管理和道路交通管理好：及时调度，疏通堵塞，是所有环节能正常工作，不相互影响。
3. Good site management and road traffic management: timely dispatch and unblock the congestion, so that all links can work normally without mutual influence.
本文标题：如何提高混凝土搅拌车的生产效率？
网址分享：/hangye/sdjbc/n67331.html
声明：本网站发布的内容（图片、视频和文字）以用户投稿、用户转载内容为主，如果涉及侵权请尽快告知，我们将会在第一时间删除。文章观点不代表本网站立场，如需处理请联系客服。电话：028-86922220；邮箱：631063699@qq.com。内容未经允许不得转载，或转载时需注明来源：
创新互联
